Very low viscosity for rapid saturation of fibreglass, Kevlar and carbon fibre laminate with resin infusion and VARTM processes. Medium cure speed hardener provides 3 to 4 hours of working time at 25°C. A typical laminate will be gelled in 8 hours. This combination is formulated specifically for resin infusion and VARTM processes. Do not use in open mould applications. Elevated temperature cure is required; thermal and mechanical properties suitable for composite components and high temperature tooling and moulds. Tg as high as 117°C with proper post cure providing excellent temperature stability and great part cosmetics.
For 5kg of resin, order 1 x 1.37kg of hardener
For 25kg of resin, order 2 x 3.43kg of hardener
For 225kg of resin, order 3 x 20.55kg of hardener
Please note that any hazardous materials over limited quantities, i.e. 5ltrs/kg+ will be a 3-5 day delivery